54mm Landcruiser Hub Socket.

[CrazyGuy]

Offroadtarvike.fi just let me know that they do not have this item in stock, but will have it within 1-2 weeks.

Price is 21 euro and they believe it to be identical to the specs of the Original Toyota tool.

Impressive both and price and tool specs...just wish i was not in such a dire need for one!

Need that damn car on the road(problem with using it both as a weekend warrior and daily driver).

[baxxter]

Use chisel and hammer to open and fit those hub nuts? And if you're afraid nuts are not tight enough (they will be), retorque after you get that tool.

[CrazyGuy]

Actually i read up on that process and it seems that doing so means that the nuts will be either too tight(causing the bearings to seize and last MUCH shorter time than they should) or they will be damaged from the screwdriver/chisel will cause it to not seal properly and possibly come loose(as the one that was on my Cruiser did and caused all that damage) it had the obvious marks of having been tightened with a chisel/screwdriver yet was not tight enough.

So i will rather wait until i get the tool i need and do it properly thanks.