AMC miehet herätys

[Valko-bandiitti]

Mulla oli kauan aikaa sitten samaa murhetta AMC:n väljän virranjakajan kanssa. Jakajan alapää oli liian väljä ja hammaskosketus meni poskelleen.
Tuosta öljynpaineesta ja sen vaikutuksesta; yhden jeepin osavalmistajan ohjeet on seuraavanlaiset

Break In Procedure For Distributor Gear

IMPORTANT: Premature gear failure and resulting engine damage may result from failure to follow these precautions!

Coat gear thoroughly with zinc or moly break-in lubricant prior to installation.

DO NOT use synthetic oils during the distributor gear break-in period. Subsequently, any suitable oil may be used.

Use 30 or 40 or multi-viscosity oil (i.e. 10W30)

For engines that are highly modified and have oil pressures exceeding 70 psi (cold), the gear should be broken in with a racing grade mineral oil.

Oil filter bypass should be removed (if vehicle is so equipped).

Carefully observe gear wear after the break-in period of several hours. Look for proper mesh, tooth alignment or excessive wear of gear teeth.

ps. Minulla on alkuperäinen korjaamomanuaali jos tarvit lainaan