Introducing FOO, FZJ80 with Portal Volvo c303 topless

[1fzpower]

Read the manual several times, still don't quite understand how to take out the main part to turn on the lathe. Anyone have pictures or description of how to take this apart?

[offroadjouni]

Alkuperäinen kirjoittaja 1fzpower

Read the manual several times, still don't quite understand how to take out the main part to turn on the lathe. Anyone have pictures or description of how to take this apart?

What part you are talking? Pinion flange, wheel hub or something else?

[1fzpower]

I don't know if I am using the right term. Trying to get the part that has the lug studs, that I need to turn down on the lathe.

Is this the Hub?

On the diagram, is the arrows pointing to the bolts to remove?

[offroadjouni]

Alkuperäinen kirjoittaja 1fzpower

I don't know if I am using the right term. Trying to get the part that has the lug studs, that I need to turn down on the lathe.

Is this the Hub?

On the diagram, is the arrows pointing to the bolts to remove?

Not sure if the whole attached diagram is the wheel hub or if part number 33 is the hub. First remove the whole package from the axle tube by removing those arrow marked bolts. Here's video how to do that on the field -> https://youtu.be/1J_suVNM9BQ?t=6m13s Then pull the portal gear away (photos at the end of the same video) and finally press 33 + others out from 40.

I never done it myself, but that shouldn't be too difficult task if you have (hydraulic) press available.

[1fzpower]

Well, there they were, about 8 bolts behind the drum brakes. Took those off, then had to run the the store to find the M8 - 1.0 thread bolt to press out the hub, but it worked really easy.

[1fzpower]

Started getting it turned down.

[1fzpower]

Well good news and bad news.

Timo shipped off the parts a few weeks ago; however, they came back to him.

He is unsure what happened or why, so looking for other shipping options like DHL.

Anyone have a great way to ship parts to the US?

Thanks,