90 Cherokee XJ rebuilding

[sms1878]

Alkuperäinen kirjoittaja ford59

You need just 2 skrewdriver. With bigger one you press piston down 1mm and with smaler one you take snapring out. Little magnet will help you to take piston and valve out from lifter.

After you have assembled lifters back together sink them to motor oil and pump few times piston to fill it with oil. You can feel when piston wont compress anymore, then its full.

sure, thanks for the tip, will do that. for now they have wait since I can do that as very last step before closing the valve cover