Projekti Mall Crawler #2 - Cherokee moggiakseleilla

[Rytari]

DRW
(dual rear wheel truck)72"

ei vaikuta mitään jarrujen paikkaan akselin leveys, ainoastaan napa, noi mun jarruraudat ei sovi ku ykköspyöräisiin napoihin, mulla on tosin yhdet semmoset navatkin vielä jemmassa.

The SRW and C&C axles use the same housings and shafts, with the difference in width being in the hubs. The housings are actuallly identical except for the location of the backing plate flange. Drums & hubs are different, but backing plates, shoes, and wheel cylinders are the same) * The SRW and Van axles use the same hubs, the C&C and DRW axles use the same hubs; Though different, the SRW/Van hubs and the C&C/DRW hubs can be interchanged causing a change to the axles WMS (see pics below) SRW and C&C axle shafts are the same ** Van, DRW, and SRW/C&C axle shafts are all different lengths as follows (long/right side / short/left side):
Type 1 - SRW/C&C - 37-5/8" / 31-5/8"Type 2 - DRW - ??
Type 3 - Van - 39-3/8" / 33-3/8"
C&C and dually brakes are the same.In all cases one side axleshaft is shorter than the other; pinions are centered. 1350 appears to be the only available stock pinion yoke.1-tons feature 40.5" perch spacing - whether C&C or pickup, whether SRW or DRW. 3/4-ton is 42.5" spacing. (COUNTER) - The perchs on my C&C measure 36"Wheel studs went metric for the 88-up C/K trucks, and 96-up vans



sinkkunapa

paripyöränapa

sinkku vasen drw oikea
kuvat ja tekstit piratesilta http://www.pirate4x4.com/tech/billav...ble/index.html