Offipalsta.COM  

Palaa takaisin   Offipalsta.COM > Linkit muihin palveluihin > Elävä Arkisto > Corvette Finland > Vuosimallit 1984-1996
Rekisteröidy Offiblogit Yhteisö Kalenteri Viestit tänään Haku

Vastaus
 
Työkalut Etsi tästä viestiketjusta Näkymä
  #1  
Vanha 23.10.2003, 10:12
Mäddi Mäddi ei ole kirjautuneena
Aloittelija
 
Rekisteröitynyt: 10.10.03
Sijainti: Vantaa, Finland.
Viestit: 12
Perusasetus

Radio


Eihän nää jenkkiradiot ymmärrä kun parittomia megahertsejä..

Onko kellään ideoita / kokemusta saako Veten standardiradioon chipattua
jotenki jossain huollossa toimimaan myös parilliset taajuudet?

nimim. Radio-City kohisee 96,3 MHz

Vastaa lainaten
  #2  
Vanha 24.10.2003, 13:04
Mäddi Mäddi ei ole kirjautuneena
Aloittelija
 
Rekisteröitynyt: 10.10.03
Sijainti: Vantaa, Finland.
Viestit: 12
Perusasetus

Sovittiin Cityn poikien kanssa että vaihtavat taajuudeksi 94,9 kun
mun radio ei soittanut parillisia eli 96,2:sta

http://www.radiocity.fi

Vastaa lainaten
  #3  
Vanha 07.11.2003, 12:11
jtammel jtammel ei ole kirjautuneena
Aktiivijäsen
 
Rekisteröitynyt: 30.03.02
Sijainti: Oulu, Finland.
Viestit: 157
Perusasetus

Tämmöiset ohjeet löytyivät netistä:

Here is the description how to modify the Delco-Bose radio model 16041551 to 0.05 MHz steps on the FM band. This is useful in countries other than the USA, where radio stations aren't on odd-tenth megahertz intervals.


remove the upper cover (3 screws)
remove the 5 screws holding the first PC board.
gently lift the PC board.
locate two diodes (1N4148) between display and IC labeled "DM 246 DQ 7815D" (28 pin) on the second PC board, now visible.
there is spare place for another two diodes. Add a diode to the location closest to the above IC. This can be done in two ways:
Remove the bottom cover and the cassete drive, clean the soldering pads from solder. Solder in the diode and reinstall all removed parts.
Do nothing of point 1), but solder the diode across the IC mentioned above. Anode to pin 10 and cathode to pin 26. (This is much easier)
reinstall PCB and cover.
If you are not familiar with radio electronics and soldering, ask a friend to do the modification, who is.
Here are the functions the other diodes control:


Diode 4 installed:
Frequency range on FM is 87.5 - 104.0 Mhz, step 0.05 Mhz, frequency range on AM is 531 - 1602 Khz, step 9 Khz.

Diode 3 installed:
Frequency range on FM is 76.0 - 90.0 Mhz, step 0.1 Mhz, frequency range on AM is 531 - 1602 Khz, step 9 Khz.
Note: D3 and D4 installed does not do anything i.e: radio act as no diode is installed in D3 and D4

Diode 2 NOT installed:
No Seek and Scan function on the radio, setting clock is as usual.

Diode 1 NOT installed:
No clock on display when radio is switched off.

Information about the casette deck:
It is a Blaupunkt Toronto SQR 46.

--------------
1988 Corvette
Vastaa lainaten
  #4  
Vanha 07.11.2003, 13:32
Mäddi Mäddi ei ole kirjautuneena
Aloittelija
 
Rekisteröitynyt: 10.10.03
Sijainti: Vantaa, Finland.
Viestit: 12
Perusasetus

Gee!

Hienot ohjeet - kiitoksia. Yksi asia kuitenkin ihmetyttää:
"Diode 4 installed: Frequency range on FM is 87.5 - 104.0 Mhz"

Loppuu noi taajuudet vähän kesken...

Mäddi

Vastaa lainaten
Vastaus


Käyttäjiä lukemassa tätä viestiketjua: 1 (0 jäsentä and 1 vierasta)
 

Pikalinkit

Samanlaisia viestiketjuja
Viestiketju Aloittaja Foorumi Vastauksia Viimeisin viesti
M: Radio-ohjattava autosetti eyeless O/M/V Muut 0 18.04.2008 22:36
radio Country-Jake Tekniikka & Jutustelu 32 09.02.2007 11:28
Radio vai"laa" puhelin? Wago-78 Tekniikka & Jutustelu 8 25.11.2003 21:23
-84 veten radio pimeänä Vuosimallit 1984-1996 1 12.03.2003 12:04
SLAY Radio MäIte URL 0 06.11.2002 23:36


Sivu luotu: 10:56 (GMT +2).