Floppyfw and HomePNA

[MäIte]

Floppyfw and HomePNA

Download floppyfw-current.img ( http://www.zelow.no/floppyfw/downloa...fw-current.img )

Format floppy to check that it's working ( superformat /dev/fd0u1440 )

Drop img-file to floppy ( dd if=floppyfw-current.img of=/dev/fd0 )

Now we are ready to change configuration ( mount -t msdos /dev/fd0 /mnt )

We switch network modules loading order in modules.lst ( vi /mnt/modules.lst ) so that pcnet32 is loaded before our intranet network card (8139cp) this way we will have HomePNA-card loadet as eth0 and intranet card eth1....

Save and umount /mnt


--------old-------------------
# Network Interface Cards:
#
3c509
3c59x
8390
ne2k-pci
#
# The ne module cannot autoprobe and needs an io port.
ne io=0x300
mii
tulip
eepro100
8139cp
8139too
pcnet32
#
-----------------------------

-------new-------------------
# Network Interface Cards:
#
3c509
3c59x
8390
ne2k-pci
#
# The ne module cannot autoprobe and needs an io port.
ne io=0x300
mii
tulip
eepro100
pcnet32
8139cp
8139too
#


---MäIte---

*Let's kill them all and let Gods sort them out*