Offipalsta.COM  

Palaa takaisin   Offipalsta.COM > Off-Road > Maasturiprojektit

Maasturiprojektit Osio on tarkoitettu etenkin pidempiaikaisten projektien seuraamiseen. Tämä on oikea paikka oman auton esittelyyn.

Vastaus
 
Työkalut Etsi tästä viestiketjusta Näkymä
  #26  
Vanha 16.03.2018, 06:43
aslakki:n Avatar
aslakki aslakki ei ole kirjautuneena
Veteraani
 
Rekisteröitynyt: 14.11.06
Sijainti: joutseno, .
Viestit: 1.209
Perusasetus

Lainaus:
Alkuperäinen kirjoittaja 1fzpower Näytä viesti
Great point. The upper link has a Johhny-joint (a ball joint) at the point above the differential. You can see it better in the post above. actually, all three points on the axle are the same johnny joint.

Right now, the upper is mocked up in small tubing; however, will be 1.5" 1/4 wall DOM if everything looks good for full articulation. The lower will be 1.75 DOM. I hope it will not explode; however, if it does, we will do version 2.0.
Sorry, i thought it is normal rubber bushing
__________________
WUOKSI OFFROAD
Vastaa lainaten
  #27  
Vanha 16.03.2018, 15:12
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

Lainaus:
Alkuperäinen kirjoittaja aslakki Näytä viesti
Sorry, i thought it is normal rubber bushing
I should share the source if anyone is interested.

https://www.ruffstuffspecialties.com...g/RODENDS.html
Liitetiedostot
Click image for larger version

Name:	15uniball.jpg‎
Views:	133
Size:	11,5 Kt
ID:	84145  
Vastaa lainaten
  #28  
Vanha 16.03.2018, 17:04
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

shims


Is this how you adapt the hub to the disc with the use of shims?
Liitetiedostot
Click image for larger version

Name:	1808_001.jpg‎
Views:	292
Size:	54,1 Kt
ID:	84147  
Vastaa lainaten
  #29  
Vanha 16.03.2018, 18:30
offroadjouni:n Avatar
offroadjouni offroadjouni ei ole kirjautuneena
Super Moderator
 
Rekisteröitynyt: 10.06.02
Sijainti: Kirkkonummi
Viestit: 6.392
Perusasetus

Lainaus:
Alkuperäinen kirjoittaja 1fzpower Näytä viesti
Is this how you adapt the hub to the disc with the use of shims?
There are multiple ways to do. Some people just machine the outer part of hub so that brake disk sits on it. This is not optimal but I haven't heard about broken bolts anyway. This additional plate you already linked looks like best option. Edit: Some kind of shims inside sounds like good compromise to me.

Vastaa lainaten
  #30  
Vanha 16.03.2018, 18:33
Qtio Qtio ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 19.08.12
Sijainti: Riihimäki
Viestit: 92
Perusasetus

I did my disc conversion like this:



Vastaa lainaten
  #31  
Vanha 16.03.2018, 20:22
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

Lainaus:
Alkuperäinen kirjoittaja Qtio Näytä viesti
I did my disc conversion like this:



great pictures!! thanks for the images and great option. after that machine work, how thick was the metal where the wheel stud sits?
Vastaa lainaten
  #32  
Vanha 17.03.2018, 14:15
Qtio Qtio ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 19.08.12
Sijainti: Riihimäki
Viestit: 92
Perusasetus

Cant remember for sure, but i think around 8-10mm.
Vastaa lainaten
  #33  
Vanha 18.03.2018, 22:53
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

smell of burning flesh


Started making stuff. Made the lower control arms and started burning in the mounts on the axle.
Liitetiedostot
Click image for larger version

Name:	64AA9144-C967-4845-BE59-EB40A188FB31.jpg‎
Views:	376
Size:	104,7 Kt
ID:	84192   Click image for larger version

Name:	8F8E0688-B679-43C9-8131-DA0990B28E46.jpg‎
Views:	343
Size:	109,5 Kt
ID:	84193   Click image for larger version

Name:	3E54FAD8-B476-4605-A4DA-D41744FF296C.jpg‎
Views:	338
Size:	72,9 Kt
ID:	84194   Click image for larger version

Name:	3FE20B56-7552-4EBC-B5D7-7EF29FBB6512.jpg‎
Views:	349
Size:	100,8 Kt
ID:	84195  
Vastaa lainaten
  #34  
Vanha 24.03.2018, 14:49
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

parts


I am getting very excited about getting parts from Timo Lipponen <timo@offroadtarvike.fi>

Hopefully, I can get the order done quickly, so they are on the way.
Vastaa lainaten
  #35  
Vanha 27.03.2018, 02:22
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

rear axle in


Took longer than I wanted, but got the rear axle in.
Liitetiedostot
Click image for larger version

Name:	EEDD31AA-3271-42E4-9659-113009806657.jpg‎
Views:	499
Size:	85,1 Kt
ID:	84437   Click image for larger version

Name:	7BBE872B-2E78-4C37-BD6D-5B5B255FE196.jpg‎
Views:	425
Size:	74,7 Kt
ID:	84438   Click image for larger version

Name:	75FFA854-0C5F-4BA2-8168-FC1E9378FF6A.jpg‎
Views:	454
Size:	101,1 Kt
ID:	84439   Click image for larger version

Name:	75B4F586-A74B-4D20-955C-EB9A8D98149B.jpg‎
Views:	409
Size:	77,3 Kt
ID:	84440   Click image for larger version

Name:	09378E6E-8137-4959-8594-5B4B8A2EB04B.jpg‎
Views:	393
Size:	98,3 Kt
ID:	84441  

Vastaa lainaten
  #36  
Vanha 27.03.2018, 19:53
pee:n Avatar
pee pee ei ole kirjautuneena
Moderator
 
Rekisteröitynyt: 21.02.04
Sijainti: Mäntsälä P
Viestit: 12.904
Perusasetus

Nice.

What bolt pattern for wheels you are planning, 6 x 139.7 ?
__________________
- Levannon We(l)ho -
Vastaa lainaten
  #37  
Vanha 29.03.2018, 01:44
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

wheels


yes, planning on 6 lug toyota/chevy wheel bolt pattern.

I am getting ready to pull apart the portal to go through it. Is there a good thread or instructions on how to take apart and put back together?

Here are pics of the front axle starting to go in. Making brackets now for the new arms.

Another question, do you use adapters for the driveshafts? The pattern seems to be similar to a Suzuki; but different inner hub.

Thanks.
Liitetiedostot
Click image for larger version

Name:	2B582AC4-4715-41A1-9921-6193F0B515D9.jpg‎
Views:	366
Size:	88,9 Kt
ID:	84468   Click image for larger version

Name:	69EADAAF-FC28-44FA-90D7-1E6FB1D0FCB6.jpg‎
Views:	437
Size:	102,2 Kt
ID:	84469  
Vastaa lainaten
  #38  
Vanha 01.04.2018, 19:31
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

Help


What do you do for converting from Toyota transfer case to the volvo diff input?
Vastaa lainaten
  #39  
Vanha 01.04.2018, 20:45
pee:n Avatar
pee pee ei ole kirjautuneena
Moderator
 
Rekisteröitynyt: 21.02.04
Sijainti: Mäntsälä P
Viestit: 12.904
Perusasetus

Lainaus:
Alkuperäinen kirjoittaja 1fzpower Näytä viesti
What do you do for converting from Toyota transfer case to the volvo diff input?


Easiest way is make adapters between cardans and transfer case or diff input, with ”lathe” (odd word, i am not sure if it is right)

Like there: 4 th and 5 th picture:


https://forums.offipalsta.com/showpo...46&postcount=1
__________________
- Levannon We(l)ho -

Viimeksi muokannut pee : 01.04.2018 20:49
Vastaa lainaten
  #40  
Vanha 02.04.2018, 15:49
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

Lainaus:
Alkuperäinen kirjoittaja pee Näytä viesti
Easiest way is make adapters between cardans and transfer case or diff input, with ”lathe” (odd word, i am not sure if it is right)

Like there: 4 th and 5 th picture:


https://forums.offipalsta.com/showpo...46&postcount=1
Perfect. Exactly what I was looking for.

Thanks.
Vastaa lainaten
  #41  
Vanha 04.04.2018, 15:58
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

Help


I keep asking for help.

I am trying to get this project done so my daughter and I can have a weekend camping and hitting trails on the 20th of this month.

I NEED PARTS!!

I had been talking with timo@offroadtarvike.fi and they were very helpful; however, I have not heard from them in almost a week and I need to get the parts shipping to the states.

Anyone know of another source?

I need the large seal and adapter

new boots

disc brake adapter for front. (I am going to make 2 caliper bracket for rear to do ebrake there also.)
Liitetiedostot
Click image for larger version

Name:	damask.jpg‎
Views:	205
Size:	209,3 Kt
ID:	84630   Click image for larger version

Name:	seal adapters.jpg‎
Views:	230
Size:	35,8 Kt
ID:	84631   Click image for larger version

Name:	IMG_0110.jpg‎
Views:	247
Size:	88,9 Kt
ID:	84632  
Vastaa lainaten
  #42  
Vanha 04.04.2018, 19:05
pee:n Avatar
pee pee ei ole kirjautuneena
Moderator
 
Rekisteröitynyt: 21.02.04
Sijainti: Mäntsälä P
Viestit: 12.904
Perusasetus

I try wake Timo ...
__________________
- Levannon We(l)ho -
Vastaa lainaten
  #43  
Vanha 04.04.2018, 22:37
KunnanMies KunnanMies ei ole kirjautuneena
Aktiivijäsen
 
Rekisteröitynyt: 01.02.10
Sijainti: ruukki
Viestit: 113
Perusasetus

servise manuals


Here you can find manuals for volvo c303.
http://www.volvo4x4.eu/manual/
Vastaa lainaten
  #44  
Vanha 05.04.2018, 02:17
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

thank you thank you


Many thanks for help.
Vastaa lainaten
  #45  
Vanha 05.04.2018, 06:11
offroadjouni:n Avatar
offroadjouni offroadjouni ei ole kirjautuneena
Super Moderator
 
Rekisteröitynyt: 10.06.02
Sijainti: Kirkkonummi
Viestit: 6.392
Perusasetus

And some spare parts from https://www.tatanka.nu/ if needed.
Vastaa lainaten
  #46  
Vanha 08.04.2018, 16:13
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

work


Work has been very busy, so only finding a few hours to work on the project; however, it is progressing.

working on welding in the brackets and the armor.
Liitetiedostot
Click image for larger version

Name:	97DA6BA5-78CB-44A2-B40C-2F0150C51E63.jpg‎
Views:	213
Size:	84,3 Kt
ID:	84702   Click image for larger version

Name:	23C497E2-61D7-41E5-AD74-8202C009D929.jpg‎
Views:	212
Size:	79,9 Kt
ID:	84703   Click image for larger version

Name:	B577D396-7D62-4270-A803-BD90D211722C.jpg‎
Views:	217
Size:	90,1 Kt
ID:	84704   Click image for larger version

Name:	A8CE3CFA-5E88-4664-9C83-647CDDD9A36D.jpg‎
Views:	211
Size:	87,8 Kt
ID:	84705  
Vastaa lainaten
  #47  
Vanha 08.04.2018, 16:23
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

shock spring mount


The stock mounts needed to be about 1/2 from the inside flange, so no way to get the bolts out to pull the portal apart, so moved them about 1" away and mounted them there. Then I cut off the spring perch and raised it 3/8 inch and will weld it back in the correct spot. This should give enough area to unbolt; however, these bolts don't have enough room to come out.... CLOSE.
Liitetiedostot
Click image for larger version

Name:	81611021-A569-4566-8C21-37AD3D5512B6.jpg‎
Views:	270
Size:	70,0 Kt
ID:	84706   Click image for larger version

Name:	0547369B-F341-4CBD-A3D8-700D7D606E4B.jpg‎
Views:	283
Size:	68,3 Kt
ID:	84707   Click image for larger version

Name:	626D4A27-AE59-4131-8BB4-C078A88CCAF7.jpg‎
Views:	283
Size:	77,5 Kt
ID:	84708  
Vastaa lainaten
  #48  
Vanha 10.04.2018, 12:37
Sumsar Sumsar ei ole kirjautuneena
Konkari+
 
Rekisteröitynyt: 18.04.16
Sijainti: Kempele, Suomi
Viestit: 697
Perusasetus

Lainaus:
Alkuperäinen kirjoittaja 1fzpower Näytä viesti
The stock mounts needed to be about 1/2 from the inside flange, so no way to get the bolts out to pull the portal apart, so moved them about 1" away and mounted them there. Then I cut off the spring perch and raised it 3/8 inch and will weld it back in the correct spot. This should give enough area to unbolt; however, these bolts don't have enough room to come out.... CLOSE.
Can stud bold be used?
Vastaa lainaten
  #49  
Vanha 10.04.2018, 16:00
1fzpower 1fzpower ei ole kirjautuneena
Jäsen
 
Rekisteröitynyt: 01.03.18
Sijainti: Kansas City MO USA
Viestit: 49
Perusasetus

Lainaus:
Alkuperäinen kirjoittaja Sumsar Näytä viesti
Can stud bold be used?
Very good point. Yes, that is the option if they ever get messed up.

On a side note, I am amazed that the bolts on this axle are not metric bolts. All standard thread bolts/nuts.
Vastaa lainaten
  #50  
Vanha 10.04.2018, 17:44
offroadjouni:n Avatar
offroadjouni offroadjouni ei ole kirjautuneena
Super Moderator
 
Rekisteröitynyt: 10.06.02
Sijainti: Kirkkonummi
Viestit: 6.392
Perusasetus

Lainaus:
Alkuperäinen kirjoittaja 1fzpower Näytä viesti
On a side note, I am amazed that the bolts on this axle are not metric bolts. All standard thread bolts/nuts.
AFAIK, the axles are made by Salisbury/Dana, so that's why it has imperial bolts and nuts.
Vastaa lainaten
Vastaus


Käyttäjiä lukemassa tätä viestiketjua: 1 (0 jäsentä and 1 vierasta)
 
Työkalut Etsi tästä viestiketjusta
Etsi tästä viestiketjusta:

Tarkennettu haku
Näkymä

Pikalinkit

Samanlaisia viestiketjuja
Viestiketju Aloittaja Foorumi Vastauksia Viimeisin viesti
hi, where to get Volvo portal axles reasonably jprscprs Tekniikka & Jutustelu 1 30.07.2016 19:59
Volvo Portal Power Meeting 2010 KooPee Tapahtumat 41 02.04.2010 06:24
VOLVO PORTAL POWER MEETING 2009! KooPee Tapahtumat 51 12.04.2009 06:49
More Volvo Portal Power Events ASuur Tapahtumat 25 27.06.2007 23:11
Volvo "Portal Power Meet" A45 Tapahtumat 82 09.03.2006 23:42


Sivu luotu: 13:49 (GMT +2).