OFFROAD TRIAL KAUSI 2013 SUUNNITTELUA

[Jare]

3.7.2.3 Dimension / Vehicle outline
The body has to be minimum from middle of front axle to the middle of rear axle, and from the inside wheels of right side to inside wheels of left side see drawing. It’s not allowed to make attachment to the body just to make it wider or longer. Single seaters is not allowed, two seats side by side should be fit inside the body. The body has to be minimum the allowed size from the bottom of the body to at least the beltline.


ja sit tietty tää:

3.7.6.3 Wings
1/3 of the tire track (profile area) must be covered with a wing. If this is not the case, this can be achieved in form of flared wings. The wing must cover the tire from the sill and 90 degrees of the tires radius. The material of the flared wings must be made out of solid and not transparent material.