Ilmastointi-ongelma

[ZR1]

QUESTION: How do I enter diagnostic mode for my A/C and how to get digital readout of various engines parameters and settings?

To enter diagnostic mode, push and hold the fan up arrow and down arrow at the same time until the LCD shows -00. You are now in diagnostic mode and may select any parameter using the up and down arrows. To see the value for that parameter, press the fan "auto" button.

Parameter Number
Parameter Description System Faults
Valid Values
0
One of these will be set if your A/C controls have a LED flashing
00 = no Faults

01 = Temp door motor circuit fault

02 = Temp door motor circuit fault

03 = Ambient Sensor Open

04 = Ambient Sensor Short

05 = In-Vehicle Temp Sensor Open

06 = In-Vehicle Temp Sensor Short

07 = Solar Load Sensor Open

08 = Solar Load Sensor Short

09 = Low Freon Detected

10 = UART Failure