Introducing FOO, FZJ80 with Portal Volvo c303 topless

[pee]

I try wake Timo ...

[KunnanMies]

Here you can find manuals for volvo c303.
http://www.volvo4x4.eu/manual/

[1fzpower]

Many thanks for help.

[offroadjouni]

And some spare parts from https://www.tatanka.nu/ if needed.

[1fzpower]

Work has been very busy, so only finding a few hours to work on the project; however, it is progressing.

working on welding in the brackets and the armor.

[1fzpower]

The stock mounts needed to be about 1/2 from the inside flange, so no way to get the bolts out to pull the portal apart, so moved them about 1" away and mounted them there. Then I cut off the spring perch and raised it 3/8 inch and will weld it back in the correct spot. This should give enough area to unbolt; however, these bolts don't have enough room to come out.... CLOSE.

[Sumsar]

Alkuperäinen kirjoittaja 1fzpower

The stock mounts needed to be about 1/2 from the inside flange, so no way to get the bolts out to pull the portal apart, so moved them about 1" away and mounted them there. Then I cut off the spring perch and raised it 3/8 inch and will weld it back in the correct spot. This should give enough area to unbolt; however, these bolts don't have enough room to come out.... CLOSE.

Can stud bold be used?