|
Maasturiprojektit Osio on tarkoitettu etenkin pidempiaikaisten projektien seuraamiseen. Tämä on oikea paikka oman auton esittelyyn. |
|
Työkalut | Etsi tästä viestiketjusta | Näkymä |
#26
|
||||
|
||||
Lainaus:
__________________
WUOKSI OFFROAD |
#27
|
|||
|
|||
I should share the source if anyone is interested.
https://www.ruffstuffspecialties.com...g/RODENDS.html |
#28
|
|||
|
|||
shims
Is this how you adapt the hub to the disc with the use of shims?
|
#29
|
||||
|
||||
Lainaus:
|
#30
|
|||
|
|||
I did my disc conversion like this:
|
#31
|
|||
|
|||
great pictures!! thanks for the images and great option. after that machine work, how thick was the metal where the wheel stud sits?
|
#32
|
|||
|
|||
Cant remember for sure, but i think around 8-10mm.
|
#33
|
|||
|
|||
smell of burning flesh
Started making stuff. Made the lower control arms and started burning in the mounts on the axle.
|
#34
|
|||
|
|||
parts
I am getting very excited about getting parts from Timo Lipponen <timo@offroadtarvike.fi>
Hopefully, I can get the order done quickly, so they are on the way. |
#35
|
|||
|
|||
rear axle in
Took longer than I wanted, but got the rear axle in.
|
#36
|
||||
|
||||
Nice.
What bolt pattern for wheels you are planning, 6 x 139.7 ?
__________________
- Levannon We(l)ho - |
#37
|
|||
|
|||
wheels
yes, planning on 6 lug toyota/chevy wheel bolt pattern.
I am getting ready to pull apart the portal to go through it. Is there a good thread or instructions on how to take apart and put back together? Here are pics of the front axle starting to go in. Making brackets now for the new arms. Another question, do you use adapters for the driveshafts? The pattern seems to be similar to a Suzuki; but different inner hub. Thanks. |
#38
|
|||
|
|||
Help
What do you do for converting from Toyota transfer case to the volvo diff input?
|
#39
|
||||
|
||||
Lainaus:
Easiest way is make adapters between cardans and transfer case or diff input, with ”lathe” (odd word, i am not sure if it is right) Like there: 4 th and 5 th picture: https://forums.offipalsta.com/showpo...46&postcount=1
__________________
- Levannon We(l)ho - Viimeksi muokannut pee : 01.04.2018 20:49 |
#40
|
|||
|
|||
Lainaus:
Thanks. |
#41
|
|||
|
|||
Help
I keep asking for help.
I am trying to get this project done so my daughter and I can have a weekend camping and hitting trails on the 20th of this month. I NEED PARTS!! I had been talking with timo@offroadtarvike.fi and they were very helpful; however, I have not heard from them in almost a week and I need to get the parts shipping to the states. Anyone know of another source? I need the large seal and adapter new boots disc brake adapter for front. (I am going to make 2 caliper bracket for rear to do ebrake there also.) |
#42
|
||||
|
||||
I try wake Timo ...
__________________
- Levannon We(l)ho - |
#43
|
|||
|
|||
servise manuals
Here you can find manuals for volvo c303.
http://www.volvo4x4.eu/manual/ |
#44
|
|||
|
|||
thank you thank you
Many thanks for help.
|
#45
|
||||
|
||||
And some spare parts from https://www.tatanka.nu/ if needed.
|
#46
|
|||
|
|||
work
Work has been very busy, so only finding a few hours to work on the project; however, it is progressing.
working on welding in the brackets and the armor. |
#47
|
|||
|
|||
shock spring mount
The stock mounts needed to be about 1/2 from the inside flange, so no way to get the bolts out to pull the portal apart, so moved them about 1" away and mounted them there. Then I cut off the spring perch and raised it 3/8 inch and will weld it back in the correct spot. This should give enough area to unbolt; however, these bolts don't have enough room to come out.... CLOSE.
|
#48
|
|||
|
|||
Lainaus:
|
#49
|
|||
|
|||
Very good point. Yes, that is the option if they ever get messed up.
On a side note, I am amazed that the bolts on this axle are not metric bolts. All standard thread bolts/nuts. |
#50
|
||||
|
||||
AFAIK, the axles are made by Salisbury/Dana, so that's why it has imperial bolts and nuts.
|
Käyttäjiä lukemassa tätä viestiketjua: 1 (0 jäsentä and 1 vierasta) | |
Työkalut | Etsi tästä viestiketjusta |
Näkymä | |
|
Samanlaisia viestiketjuja | ||||
Viestiketju | Aloittaja | Foorumi | Vastauksia | Viimeisin viesti |
hi, where to get Volvo portal axles reasonably | jprscprs | Tekniikka & Jutustelu | 1 | 30.07.2016 19:59 |
Volvo Portal Power Meeting 2010 | KooPee | Tapahtumat | 41 | 02.04.2010 06:24 |
VOLVO PORTAL POWER MEETING 2009! | KooPee | Tapahtumat | 51 | 12.04.2009 06:49 |
More Volvo Portal Power Events | ASuur | Tapahtumat | 25 | 27.06.2007 23:11 |
Volvo "Portal Power Meet" | A45 | Tapahtumat | 82 | 09.03.2006 23:42 |