90 Cherokee XJ rebuilding

[poksutin]

engine porn

[sms1878]

finally had sometime to put things back together. not all though.

cleaned up that stator and removed oil seal to replace. closed the body after 3 months

and now time for valve-body. hopefully won't screw things up in here.

except that last pin. cs.

[sms1878]

valve bodies are ready. replaced the springs with transgo kits and cleaned up valve guides.

gonna drill the middle plate and close it up till the cracking.

i used toyota supra 7m-ge service specs as reference. jeep aw4 diagrams/specs didn't match on the valve body i have.

[sms1878]

valve body mods with diagrams and marks on the plate.

the check balls re-located according to toyota diagrams.

bought new oil pump seal. FPM type. 22euros.

[sms1878]

re-positioned check-balls in valve-body and end of story with transmission.

[sms1878]

all set. finished with torque convertor. primed the shafts.

[Bonne]

Neat work sms1878! What primer/top coat you are using on the parts? For example on the engine/tranny/casings etc which will be in hot conditions, what kind of primer to be used in order to keep it from flaking off after short while? I have probably made some shortcuts while cleaning/preparations prior to the painting...

Thanks in advance..