90 Cherokee XJ rebuilding

[sms1878]

was working in workshop for a while and now have some free time again so back to work.

washed inside the intake but seems there is still little bit dirt left. injector seats needs little bit polishing but fine for now.

disassembled throttle body and sunk it in thinner for couple of days and did some buffing inside.

[sms1878]

took off the tranny cover to change oil filter so on but there is some water inside

[poksutin]

awesome rebuild...and that titan site was nice too gotta open my engine soon too to find that annoying tocking :S
i think its the bearings :S

https://www.youtube.com/watch?v=JzOf...ature=youtu.be

thats the tocking

[sms1878]

Alkuperäinen kirjoittaja poksutin

awesome rebuild...and that titan site was nice too gotta open my engine soon too to find that annoying tocking :S
i think its the bearings :S

https://www.youtube.com/watch?v=JzOf...ature=youtu.be

thats the tocking

not sure but sounds like timing chain loose and hitting the cover.. take a thin screw driver, start the engine and check around the engine where the knocking is stronger.

or you can test the chain cranking engine it with wrench and check the distributor. if there is a delay, it is the chain.

[poksutin]

Alkuperäinen kirjoittaja sms1878

not sure but sounds like timing chain loose and hitting the cover.. take a thin screw driver, start the engine and check around the engine where the knocking is stronger.

or you can test the chain cranking engine it with wrench and check the distributor. if there is a delay, it is the chain.

have to check that too...easier than taking the oilpan away

but i think that the loudest part is between the oilpan and flywheel :S

it does have a tiny rpm drop when idling. it idles on the first line... i think between 400-500rpm but it still runs great... acceleration etc is fine..

[sms1878]

got one TransGO reprogramming kit coming in 2-3 weeks.

l'll see how it will change the shifting.

[poksutin]

finland needs updates