http://www.fourwheeler.com/projectbu.../photo_16.html
Remove the 1/4-inch NPT pipe plug from the oil gallery above the oil filter, near the oil cooler lines, and install the adapter and the 90-degree elbow. The braided oil feed line can then be routed up to connect with the fitting on top of the turbo. Before you connect the line at the turbo, pump in a few squirts of motor oil to prelube the turbo before startup. Take care to prevent the braided-steel line from chafing against fuel lines.
Eli tommonen löyty alle 5min...
$ $ $ /// Jos se ei satu, niin ainakin se maxaa!!! /// $ $ $