Lainaus:
quote:
Mulla oli kauan aikaa sitten samaa murhetta AMC:n väljän virranjakajan kanssa. Jakajan alapää oli liian väljä ja hammaskosketus meni poskelleen.
Tuosta öljynpaineesta ja sen vaikutuksesta; yhden jeepin osavalmistajan ohjeet on seuraavanlaiset
Break In Procedure For Distributor Gear
IMPORTANT: Premature gear failure and resulting engine damage may result from failure to follow these precautions!
Coat gear thoroughly with zinc or moly break-in lubricant prior to installation.
DO NOT use synthetic oils during the distributor gear break-in period. Subsequently, any suitable oil may be used.
Use 30 or 40 or multi-viscosity oil (i.e. 10W30)
For engines that are highly modified and have oil pressures exceeding 70 psi (cold), the gear should be broken in with a racing grade mineral oil.
Oil filter bypass should be removed (if vehicle is so equipped).
Carefully observe gear wear after the break-in period of several hours. Look for proper mesh, tooth alignment or excessive wear of gear teeth.
ps. Minulla on alkuperäinen korjaamomanuaali jos tarvit lainaan
|
Joo kyllä semmosta manuaalia olis kiva lukea.
Laitatko postilla vai miten. Posti maksut kyllä maksetaan.
T: Jari Muje / 040-514 2931
Osoite on
Jari Muje
Valkeisenmäki 5
83460 HARINJÄRVI