Sehän saapui.. jos viikonloppuna saisi viriteltyä??
RED (+) constant power input: Connect to a fused source of constant 12V.
- Punaiseen virta akulta ja sulake väliin tietysti.
BLACK (-) chassis ground input: Connect this wire to a paint-free surface on the vehicle chassis. Use a factory bolt if
possible.
- Musta maadoitetaan koriin.
VIOLET/BROWN (+) CCD bus output: Connect this wire to the violet/brown (+) CCD bus signal wire in the vehicle.
- violetti/ruskea tulee odb portin johtoihin, josta pitäisi löytyä violetti/ruskea
WHITE/BLACK (-) CCD bus output: Connect this wire to the white/black (-) CCD bus signal wire in the vehicle.
- valkea/musta odb portille ja siellä on valkea/musta
BLUE/WHITE (-) disarm/driver’s unlock input: If the system is being wired to unlock the driver’s door only, connect this wire to the (-) unlock output from the DEI keyless or security system.
- Eli tuon kun maadoittaa, niin ajonesto lähtee pois? Eli nappi väliin ja johto runkoon?