|
Maasturiprojektit Osio on tarkoitettu etenkin pidempiaikaisten projektien seuraamiseen. Tämä on oikea paikka oman auton esittelyyn. |
|
|
Työkalut | Etsi tästä viestiketjusta | Näkymä |
#101
|
||||
|
||||
kiitos 88
why do we use manual gearbox Arska-tehtaalta? I like them more than automatic, if you break 1 gear then the gearbox will still work, if it gets very hot - it will still work, it doesnt mind if its upside down - it will still work, if it gets a lot of water in it - no problem <img src=icon_smile_big.gif border=0 align=middle> for me personally I find it easier to drive manual in swamp than automatic, I get to hear from the noise of the engine how hard it has to work so I can be soooooo gentle and not rip the surface, its also good with manual when you cannot see your wheels - when the pedal in up then you know the wheels are turning, you dont get that feedback with automatic. I dont think one is better than the other - its just preference and what Im used to apiaani - we use defender seats because they are a lot more comfortable than racing seats, it sounds a little stupid but we drive for long periods and comfort becomes important <img src=icon_smile_big.gif border=0 align=middle> also these are cheap, they recline, they're not too heavy, you can pull the bottom piece out without tools (in order to reach the battery) and most important they fit my 290kg fat ass! I dont really like race seatbelts - I know they are safer but we get in and out of the car a lot and I like the fact I can reach something in the car without having to take off the belt, Kim found some nice belts that are race harness but still move - but we cant afford these <img src=icon_smile_sad.gif border=0 align=middle> nothing exceeds like excess.... |
#102
|
||||
|
||||
a little bit of pushing here...
and some from here... and finally this lives here <img src=icon_smile_big.gif border=0 align=middle> nothing exceeds like excess.... |
#103
|
||||
|
||||
we smoked some more cigarettes
made some new engine mounts stared some more started to paint some bodywork it almost looks like photoshop - but it really is THAT yellow <img src=icon_smile_big.gif border=0 align=middle> John fits the propshafts Vinny and me stare some more.. do a little welding get the drivers footwell sorted - all the controls are working now, we still need to do the hydraulics though <img src=icon_smile_sad.gif border=0 align=middle> we have to make a new end for the gas pedal so the LS1 cable fits properly firewall - looks like a Series 2 Landrover bonnet <img src=icon_smile_big.gif border=0 align=middle> nothing exceeds like excess.... |
#104
|
||||
|
||||
No fence, but, GOD DAMN those fenders are ugly!
<img src=icon_smile_big.gif border=0 align=middle> "Suck my dick" -Ron Jeremy Montenegros#10 |
#105
|
||||
|
||||
<img src=icon_smile_big.gif border=0 align=middle> no offence taken! its the law here that your wheels must be covered when viewed from above, but I think that some pieces may "fall off" soon <img src=icon_smile_wink.gif border=0 align=middle> the good thing about truck mudguards is they are very light and when you push them into trees the bend and then go back to orginal shape, they are pretty cheap as well <img src=icon_smile_big.gif border=0 align=middle>
welding pieces of exhaust pipe now it clears we look for an airbox- this one is from a Landrover V8, the filter is big enough.. ...but it leaks, so out with the Tig again.... ....and make a new one this one keeps the water out - unlike the landrover one so we make a hydraulic tank at the same time we fit the windscreen - a nice guy cut 50mm from it (the cab is not as wide as a Defender) now the engine bay looks a bit more like it Gear levers (at long last) hydraulic pump and linkage to make its gearbox work control block and airbox fitted - we must make the snorkal still winch gets fitted nothing exceeds like excess.... |
#106
|
||||
|
||||
Kimple and Tapio have as much work to do as us - VoldDis is now blue!
Tapio will drive in Prototype class at Ladoga - support your local proto teams <img src=icon_smile_big.gif border=0 align=middle> nothing exceeds like excess.... |
#107
|
||||
|
||||
Your Mouse looks insane! <img src=icon_smile_cool.gif border=0 align=middle>
Some tubes and welding... Amazing! Thats really nice! I hope we can see some video of testdrive sometime... and sorry about my bad english! <img src=icon_smile_blackeye.gif border=0 align=middle> Project Deliverator! |
#108
|
||||
|
||||
Could you tell more about your winch? What's the pump, motor, gear ratio etc? What kind of gear box it has? Any more photos of it?
/* Life Begins at 35" */ |
#109
|
||||
|
||||
Morjenz -thanks, we hope to start Mouse up tonight... fingers crossed - we leave England to head for Finland on Friday.. lots of work to do and no time left <img src=icon_smile_sad.gif border=0 align=middle> - good luck with project Deliverator!!
offroadjouni - it was a Type R Milemarker, but now its been violated it should be twice as fast, we will see in a few days if the maths is correct, I will take a little video this weekend we worked so hard, friends came to help and it was like a madhouse in the workshop, heres some more stuff instrument cover fuel system bolts to the back of the petrol tank we ring Roope and ask him what size vacuum tank he has, then we make one a little bit bigger <img src=icon_smile_wink.gif border=0 align=middle> swirl pot for the coolant system - this lives where the original LS1 steering tank used to be the radiator we had needed some changes... and we make some "T" pieces for the cooling system.. its cheaper to make them than to buy them - and this way I know they will fit <img src=icon_smile_big.gif border=0 align=middle> lots of stuff.. Mike starts to make fibreglass front wings we make a snorkal and join it to the airbox - the snorkal is 102mm bore John has a fight with the electric monster the exhaust is going to be a "little" bit loud... <img src=icon_smile_big.gif border=0 align=middle> nothing exceeds like excess.... |
#110
|
||||
|
||||
Turn up your speakers and click on this link <img src=icon_smile_big.gif border=0 align=middle> nothing exceeds like excess.... |
#111
|
|||
|
|||
Lainaus:
Terv Jyty |
#112
|
||||
|
||||
I really like your Mouses engine sound Its sounds really loud with 18" subwoofer... Keep on good work :P
|
#113
|
|||
|
|||
Where are older photos?
__________________
"Kerran luulin olevani väärässä. Erehdyin." -Oscar Wilde- Yritin epäonnistua. Onnistuin. Viimeksi muokannut pastirolli : 15.10.2008 15:57 |
#114
|
||||
|
||||
What is happening after 3 years?
|
#115
|
||||
|
||||
Auto nykyjään Belgiassa, myyty sinne pari vuotta sitten...
__________________
-kari- FS Motorsport ry |
#116
|
||||
|
||||
Nonni... Vieläks tuolla suunnalla mitään harrastuksen suhteen tapahtuu?
|
#117
|
||||
|
||||
Lainaus:
Mousen nykyinen omistaja oli käsittääkseni tänäkin vuonna Ladogassa, ajoivat ryhmässä, oli uutta discoa, p38 range ja olisko ollu yksi efi RR
__________________
-kari- FS Motorsport ry |
|
Käyttäjiä lukemassa tätä viestiketjua: 1 (0 jäsentä and 1 vierasta) | |
|
Samanlaisia viestiketjuja | ||||
Viestiketju | Aloittaja | Foorumi | Vastauksia | Viimeisin viesti |
Mouse balls | zartsa | Jokes | 0 | 19.05.2003 12:24 |